
PICkit? Serial Analyzer Overview
1.5.1
Status LEDs
The Status LEDs indicate the status of the PICkit? Serial Analyzer.
1. Power (green) – Power is applied to the PICkit? Serial Analyzer by the USB
port.
2. Target (yellow) – The PICkit? Serial Analyzer is communicating with the target
device.
3. Busy (red) – The PICkit? Serial Analyzer is communicating with the target
device.
1.5.2
Push Button
The push button is available for future implementation.
1.5.3
Lanyard Connection
To help prevent possible loss of the PICkit? Serial Analyzer, a convenient lanyard
connection is available.
1.5.4
USB Port Connection
The USB Port Connection is a USB mini-B connector. Connect the PICkit? Serial
Analyzer to the PC using the supplied cable.
1.5.5
Pin 1 Marker
The Pin 1 marker assists in aligning the PICkit? Serial Analyzer with the target device.
1.5.6
Communication Connector
The communication connector connects to the target device using an inexpensive
6-pin, 0.100" pitch spacing, 0.025” square pin header. Pin assignments are shown in
FIGURE 1-3:
PICkit? SERIAL ANALYZER PIN ASSIGNMENTS
Pin 1 Indicator
Pin Description
I
2 C?
SPI
USART
1
2
3
4
5
6
1
2
3
4
5
6
—
+V
GND
SDA
SCL
—
CS
+V
GND
SDI
SCK
SDO
TX
+V
GND
—
—
RX
Note:
? 2007 Microchip Technology Inc.
The 6-pin header (0.100" spacing) accepts 0.025" square pins.
DS51647A-page 7